FLO-FAST DEF Pump Pro 15 Gallon System

The Professional Model Diesel Exhaust Fluid Pump is made of a plastic composite material that is compatible with DEF. The full system includes a DEF Pump, (2) 7.5 gallon containers, and the Versa Cart.

The Professional Model Diesel Exhaust Fluid Pump is designed for various fuel and fluid transfer needs including DEF. Developed from a plastic composite material, the Diesel Exhaust Fluid Pump is compatible with all fluid types ranging from water and fuels to the harshest chemicals like DEF. The Professional Model Pump, coupled with our patented technology, is designed to fit on the FLO-FAST™ containers. In addition, the pump can adapt to industry standard 15, 30, and 55 gallon barrels with a bung adapter. The pump has three internal vanes in effect builds pressure to pump and draw fluid up to 8 gallons per minute. Transfer fluids fast, safe, and easy, with this ultra-durable, and made to last pump.

STEPS THE OPERATOR MUST TAKE:

BEFORE PUMPING & DRAWING

• Make sure safety tether squeeze clamp is attached to the equipment, utility vehicle or boat before transferring fluid. The purpose of the squeeze clamp is to ensure the hose will stay in the filler opening.

PUMPING AND DRAWING:

• When pumping or drawing fluid with the FLO-FAST pump, you must properly vent the system. Turn vent counterclockwise (turns into container) to open vent and clockwise (vent turns outward) to close the vent.
• If you are using the FLO-FAST pump with fluids that do not lubricate, over time you may have to prime the pump if you are trying to pump or draw fluid with a dry pump.
• You may need to prime the pump if you are trying to draw or suck fluid from more than 7 feet away. (Each pump comes with 5 feet of hose)
• The 5-foot accessory extension is for pumping purposes.
• If you are pumping or drawing at a rate of more than 60 revolutions per minute, you run the risk of over pressurizing the pump.

WHEN FLUID TRANSFER IS COMPLETE

• Carefully raise the line out of the fluid opening and let any residual fluid drain back into the system container. Do not set the hose down until all of the fluid has drained back into the container.
• Place plug on the tether line into the aluminum tube to seal the hose.
• Before removing the pump system from containers, make several counterclockwise rotations to pull residual fluid out of the pump housing.
• Leave the pump on container for a minimum of 15 minutes to ensure any fluid inside the pump housing drains back into the container.
• Always remove the FLO-FAST pump from the container and place the original cap back onto the container to properly seal and store fluid.
• To eliminate any person from pumping fluid accidentally, do not store the FLO-FAST pump in the container. Always return the pump and system to a safe area where children / others do not have access to it.

• Never allow individuals under licensed age to use the FLO-FAST pump or system.
• Never let anyone use the FLO-FAST system or containers that has not read this instruction sheet in full.
• Do not transport the FLO-FAST pump while it is in a container.
• Only use the FLO-FAST pump on industry standard largemouth containers.
• Pouring from these containers can be dangerous and is not recommended with a volatile or combustible fluids. For that reason, we have designed the FLO-FAST pump system to safely transfer these fluids.
• Do not use the FLO-FAST pump on any container that does not fit the FLO-FAST pump.
• If you choose to use FLO-FAST with any type of volatile fluid like gasoline, methanol, kerosene, or any harmful chemical, do not inhale vapors.
• When filling a container, always place the container on the ground.
• To allow for fluid expansion, do not overfill the container beyond manufacturer’s specified levels.
• If any component breaks on the FLO-FAST portable fluid transfer pump or system, do not use until you have replaced all of the broken components.